HumiSeal Thinner 600
4 5 (1 evaluate)Category: Thinners
Manufacturer: Humiseal
Packaging: 5L, 20L
Origin: UK or USA
Product Specification
| Compatible Coating | 1B31EPA. 1B73EPA, 1R32A-2 |
| Relative Evaporating Rate (BuAc =1) | 0.37 |
| Specific Gravity | 0.97 ± 0.01 |
| Boiling Point (°C) | 141 |
| Vapor Pressure (mmHg) | 3.8 |
| Vapor Density (Air=1) | 4.6 |
| Flash Point (°C) | 47 |
| VOC (grams/litre) | 969 |
| Shelf Life (DOM) | 24 months |
| Colour | Clear |
Thinner 600 offers the following features:
-
compatibility with HumiSeal coatings including 1A67, 1B31-EPA, 1B73-EPA, 1R32A-2, 1A33, and 1B51
-
it complies with the RoHS Directive 2015/863/EU and contains flammable ingredients.
Directions for Use of HumiSeal Thinner 600
Add HumiSeal® Thinner to a compatible coating until the desired viscosity is obtained.
To ensure safe handling of HumiSeal® Thinners, it is important to observe the following precautions:
-
Use only in areas with proper ventilation.
-
Wear protective gloves and goggles during use.
-
If skin contact occurs, wash thoroughly with water.
-
In case of eye contact, rinse immediately with water and seek medical attention.
-
Avoid inhaling vapors for extended periods.
-
Dispose of any unused HumiSeal® products in full compliance with Local, State, and Federal regulations.
-
Refer to the Material Safety Data Sheet (MSDS/SDS) for detailed product safety information.
AAdministratorsQTV
Welcome. Feel free to leave a comment, we will respond soon