Klubersynth BEM 44-4600

Technical data sheet of Klubersynth BEM 44-4600

Article number

004319

Chemical composition, oil type

Synthetic hydrocarbon oil

Chemical composition, thickener

Special lithium soap

Lowest operating temperature

-50 °C / -58 °F

Maximum working temperature

140 °C / 284 °F

Color

Beige

Structure

Uniformity

Density at 20 °C

About 0.86 g/cm³

Penetration after test, DIN ISO 2137, 25 °C

Bottom value: 400 x 0.1 mm

Top value: 430 x 0.1 mm

Kinematic viscosity of base oil, 40 °C

About 500 mm²/s

Kinematic viscosity of base oil, 100 °C

About 56 mm²/s

Effect of Copper on Wear, ASTM D4048, 24 h/100 °C

1 – 100 corrosion

Corrosion resistance, DIN 51802, 1 week, distilled water

<= 1 corrosion degree

Oil pressure, DIN 51805-2, -50 °C

<= 1,400 mbar

Drop point, DIN ISO 2176, IP 396

>= 180 °C

Ball Bearing Tester, Weld Load, ASTM D 2596

>= 250 kgf

Ball-to-ball test machine, coefficient of wear, ASTM D 2266, 75 °C, 1200 rpm, 40 kg, 60 min, wear spot diameter

<= 0.6 mm

FZG abrasion test, DIN ISO 14635-1, A/8.3/90

Wear resistance stage >= 13

Minimum shelf life from date of manufacture – dry place, avoid cold and in original packaging

About 24 months (from date of manufacture)

Key features of Klubersynth BEM 44-4600

With its high load-carrying capacity, Klubersynth BEM 44-4600 provides comprehensive protection for gears, helping to minimize wear and damage, even under severe operating conditions and high loads.

Thanks to its thixotropic properties, Klubersynth BEM 44-4600 not only maintains the durability of the lubrication but also prevents maximum gear oil leakage, ensuring stable performance throughout the entire operation.

With a wide operating temperature range, Klubersynth BEM 44-4600 can be used in a wide range of working environments, from low to high temperature systems, meeting the needs of many different industries.

Klubersynth BEM 44-4600 helps to reduce energy consumption, while improving work efficiency and optimizing the operation of necessary equipment.

Application of Klubersynth BEM 44-4600

Klubersynth BEM 44-4600 is used for general industrial equipment and machine tools where long-lasting and efficient operation is required throughout the entire operation.

Klubersynth BEM 44-4600 is ideal for applications in the mining and cement industry where equipment is subjected to high loads and harsh working conditions.

Klubersynth BEM 44-4600 supports the efficient lubrication of machine parts and rotating shafts in the robotics industry, helping to maintain high performance and precision in automation applications.

Klubersynth BEM 44-4600 provides optimum lubrication of shafts, bearings and load-bearing components in mobile drilling equipment, ensuring stable and efficient operation in outdoor environments.

Klubersynth BEM 44-4600 is applied to lubricate the transmissions of port cranes and industrial lifting machines, helping to maintain operating efficiency and prolong the service life of transmission components.

Klubersynth BEM 44-4600 is suitable for drive shafts in mixers and reactors, especially in chemical and oil production processes, helping to maintain stable working performance and reduce wear.

Klubersynth BEM 44-4600 is used in industrial grinding machines, such as marble mills and ball mills, where a high load-bearing grease is required to protect machine components during grinding.

Klubersynth BEM 44-4600 provides effective lubrication for the transmission systems of aircraft and transport vehicles, helping to maintain stable performance and ensuring safety during travel.