Kluberoil 4 UH1-1500 N Spray

Technical data sheet of Kluberoil 4 UH1-1500 N Spray

Properties	Value	Unit
Article number	081263	-
NSF-H1 registered	130 064	-
Maximum working temperature	120 °C / 248 °F	°C / °F
Density (based on DIN 51757) at 15 °C	approximately 866	kg/m³
Kinematic viscosity (DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C)	approximately 1,500	mm²/s
Kinematic viscosity (DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C)	approximately 125	mm²/s
Viscosity index (DIN ISO 2909)	>= 180	-
ISO viscosity grade (DIN ISO 3448)	1 500	-
Corrosion resistance on steel (DIN ISO 7120, method A, steel, 24 h/60 °C)	stainless	-
Copper corrosion (DIN EN ISO 2160, 24 h/100°C)	1 - 100	Corrosion level
Aging Properties (ASTM D 2893, Viscosity Increase)	<= 6 %	-
FAG FE8 rolling bearing test (DIN 51819-3, D 7,5/80-80, retaining ring wear)	<= 200	mg
FAG FE8 rolling bearing test (DIN 51819-3, D 7,5/80-80, roller wear)	<= 30	mg
Flash point (DIN EN ISO 2592, Cleveland, open cup apparatus)	>= 200 °C	°C
FZG scratch resistance test (DIN ISO 14635-1, A/8.3/90, scratch resistance load stage)	>= 12	-
Dropping point (DIN ISO 3016)	<= -25 °C	°C
Minimum shelf life from date of manufacture (in a dry, frost-free place, in original unopened container)	approximately 36	month

Properties

Value

Unit

Article number

081263

NSF-H1 registered

130 064

Maximum working temperature

120 °C / 248 °F

°C / °F

Density (based on DIN 51757) at 15 °C

approximately 866

kg/m³

Kinematic viscosity (DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C)

approximately 1,500

mm²/s

Kinematic viscosity (DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C)

approximately 125

mm²/s

Viscosity index (DIN ISO 2909)

>= 180

ISO viscosity grade (DIN ISO 3448)

1 500

Corrosion resistance on steel (DIN ISO 7120, method A, steel, 24 h/60 °C)

stainless

Copper corrosion (DIN EN ISO 2160, 24 h/100°C)

1 - 100

Corrosion level

Aging Properties (ASTM D 2893, Viscosity Increase)

<= 6 %

FAG FE8 rolling bearing test (DIN 51819-3, D 7,5/80-80, retaining ring wear)

<= 200

FAG FE8 rolling bearing test (DIN 51819-3, D 7,5/80-80, roller wear)

<= 30

Flash point (DIN EN ISO 2592, Cleveland, open cup apparatus)

>= 200 °C

°C

FZG scratch resistance test (DIN ISO 14635-1, A/8.3/90, scratch resistance load stage)

>= 12

Dropping point (DIN ISO 3016)

<= -25 °C

°C

Minimum shelf life from date of manufacture (in a dry, frost-free place, in original unopened container)

approximately 36

month

Key features of Kluberoil 4 UH1-1500 N Spray

Kluberoil 4 UH1-1500 N Spray is NSF H1 certified, which makes the product safe in case of incidental contact with food. This is especially important in the food and pharmaceutical industries, where strict safety and hygiene requirements are required.

Kluberoil 4 UH1-1500 N Spray has extremely good scratch and abrasion resistance, helping to protect machine parts from damage due to friction and minimize wear, prolonging the life of equipment, maintaining long-term working performance.

With its effective lubrication properties, Kluberoil 4 UH1-1500 N Spray provides optimum protection for gears and bearings, helping to minimise friction and wear. Kluberoil 4 UH1-1500 N Spray ensures that the critical components in the transmission system operate smoothly and reliably, minimising disruptions to operations.

Kluberoil 4 UH1-1500 N Spray features high shear stability, creating a strong and reliable lubricating film that protects machine components from wear and damage caused by severe working conditions, and keeps components operating efficiently.

Kluberoil 4 UH1-1500 N Spray has outstanding resistance to aging and oxidation, helping to maintain stable performance over long periods of time and protect components from the effects of environmental factors such as high temperatures and oxygen, thereby increasing the life of the equipment.

Kluberoil 4 UH1-1500 N Spray has excellent viscosity-thermal properties, allowing effective operation over a wide temperature range. This makes the product the ideal choice for applications requiring stable operation even in harsh working environments and constantly changing temperatures.

Kluberoil 4 UH1-1500 N Spray has very low foaming ability, helping to ensure the stability of the lubricating film and minimize the risk of foaming during use, thereby improving the efficiency of equipment operation.

Thanks to its friction optimization capabilities, this oil helps to reduce energy consumption during operation, bringing higher energy efficiency to mechanical systems, helping to save operating costs and minimize negative impacts on the environment.

Kluberoil 4 UH1-1500 N Spray has good compatibility with elastomer materials, helping to protect these parts from wear and damage, while maintaining stable performance throughout the service life.

Applications of Kluberoil 4 UH1-1500 N Spray

Kluberoil 4 UH1-1500 N Spray is commonly used in areas requiring high standards of safety and quality, such as food and pharmaceutical production.

Kluberoil 4 UH1-1500 N Spray is used for the lubrication of heavily loaded helical, bevel and worm gears, as well as bearings, main shafts, couplings, and lifting, transmission and conveying chains. Kluberoil 4 UH1-1500 N Spray provides outstanding lubrication performance, helping to maintain stable operation and minimize wear in heavily loaded applications.