Isoflex Topas NCA 52

Technical data sheet of Isoflex Topas NCA 52

Chemical composition, oil type

Synthetic hydrocarbon oil

Chemical composition, solid

Special calcium soap

Low serving temperature

-50 °C / -58 °F

High serving temperature

130 °C / 266 °F

Color Range

Beige

Specific gravity at 20 °C

About 0.89 g/cm³

Penetration after working, DIN ISO 2137, 25 °C

Low limit value: 265 x 0.1 mm
High limit value: 295 x 0.1 mm

Shear viscosity at 25 °C, shear rate 300 s-1

Low limit value: 2,800 mPas
High limit value: 5,200 mPas

Engine viscosity of base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C

About 31 mm²/s

Engine Viscosity, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C

About 5.9 mm²/s

Anti-corrosion properties of lubricating greases, DIN 51802, (SKF-EMCOR), test period: 1 week, distilled water

<= 1 corrosion degree

Corrosion resistant copper tubes, DIN 51811, (grease lubricated), 24h/120 °C

1 – 120 degree corrosion

Grease flow pressure, DIN 51805, test temperature: -40 °C

<= 1,400 mbar

Speed factor (nx dm)

About 1,000,000 mm/min

Drop point, DIN ISO 2176

>= 220 °C

Minimum shelf life from date of manufacture – in a dry, frost-free place and in unopened original packaging

About 36 months

Key features of Isoflex Topas NCA 52

Isoflex Topas NCA 52 is capable of operating effectively over a wide temperature range of -50°C to 130°C (-58°F to 266°F), allowing use in a wide range of environments with varying temperature conditions.

Isoflex Topas NCA 52 is designed to absorb powerful pressures, helping to protect equipment components from damage caused by high pressures, ensuring system durability and stability.

Isoflex Topas NCA 52 provides superior lubrication of bearings, gears and moving parts, helping to reduce friction and wear, thereby enhancing equipment performance and life.

With its strong anti-wear properties, Isoflex Topas NCA 52 helps protect mechanical components from wear and tear during operation, extending the life of the equipment.

Isoflex Topas NCA 52 is resistant to oxidation and aging, maintaining stability and long-term lubrication efficiency, even under severe working conditions.

Isoflex Topas NCA 52 supports working speeds up to 1,000,000 mm x min⁻¹, ensuring optimum performance in applications with demanding operating speeds.

With its homogeneous structure and short fibres, Isoflex Topas NCA 52 ensures a constant and even distribution of lubrication, providing enhanced protection for machine components.

Application of Isoflex Topas NCA 52

Isoflex Topas NCA 52 is ideal for use in ball and plain bearings operating under high loads at high speeds and accelerations, helping to ensure smooth, stable and durable operation under severe conditions.

Isoflex Topas NCA 52 is suitable for transmission systems, especially those applications requiring superior durability and performance, such as in the automotive industry where reliability and efficiency are important factors.

Isoflex Topas NCA 52 is used for the lubrication of linear motion guidance systems, including applications in process and automation technology, helping the moving mechanisms to operate smoothly and efficiently.

With its superior safety, Isoflex Topas NCA 52 can be used in working environments that require food safety standards, protecting equipment in food production processes without affecting quality.

Thanks to its low starting torque and excellent wear protection, Isoflex Topas NCA 52 is ideally suited for long-term lubrication applications for motion guides and ball screws, optimizing performance and durability in automation environments.

Isoflex Topas NCA 52 is ideal for components requiring lubrication prior to immersion or during extremely high temperature drying processes up to 180°C. Even during short heat treatments, the grease remains stable at friction points, providing reliable lubrication throughout the entire operation.