G.A.N.850 EP-00
4 5 (1 evaluate)Category: Brugarolas
Manufacturer: Brugarolas
Origin: Spain
G.A.N. 850 EP-00 grease is a low-viscosity lubricating grease designed for one-way systems and gearboxes (speed reducers). It is formulated with mineral oil and lithium soap, combined with anti-corrosion and EP additives.
Technical data sheet of G.A.N. 850 EP-00
| Physical | Typical Value |
|---|---|
|
Base Oil |
Mineral oil |
| Thickeners (soaps) | Lithium soap |
|
Penetration at 25°C |
400/430 |
|
Four Ball Wear Test (IP-239) |
|
|
- Load bearing capacity when welding, (kg) |
Min 250 |
Specific features:
| Physical | Typical Value |
|---|---|
|
NLGI Class |
00 |
|
Penetration (ASTMD-217) |
60 W, mm x 0.1 |
|
- at 105W |
400-430 (Max +40) |
|
Drop point |
Min 170°C |
|
Four Ball Wear Test (IP – 239) |
|
|
- Grinding diameter 1h/80 kg |
Max 0.45 mm |
|
- Grinding diameter 1h/40 kg |
Max 0.45 mm |
| Oxidation stability, 100h/100°C (ASTM D-942) |
Max 0.45 bar |
| Copper Corrosion, 22h/100°C (ASTMD-4048) |
Max 1 b |
| Operating temperature range |
-20 to 120°C |
MSDS information of G.A.N. 850 EP-00
| MSDS information |
Typical Value |
| Chemical name |
G.A.N. 850 EP-00 |
| Health hazard |
Chemical Hazards: The grease can cause skin and eye burns. Health Hazards: The grease can cause skin, eye, and respiratory irritation |
| First aid measures |
If fat is swallowed, seek medical attention immediately. If fat is inhaled, move to an area with fresh air and breathe deeply. If fat comes contact with skin, wash thoroughly with soap and water. If fat enters the eyes, rinse with clean water for at least 15 minutes and seek medical attention immediately |
| Precautions | Wear gloves, goggles, and a mask when using the product |
| Preserve | If grease is spilled the environment, collect it and dispose of it in accordance with regulations |
| Treatment and disposal |
If fat is discarded, it must be disposed of in accordance with the law. |
Applications of G.A.N. 850 EP-00
Centralized Lubrication System: Specifically designed for installations where the grease must pass through long pipes to avoid the risk of clogging.
Gearbox (Reduction Gear): Recommended as a grease for extending the life of medium-duty gearboxes operating with grease or where high resistance to leakage is required.
Application: Fill the gearbox using a pump in a centralized system, maintain the level, and replace the grease after approximately 8,000 hours of operation.
Benefits:
- High lubricating and anti-corrosion properties.
- Very fluid and pumpable.
- High mechanical and chemical stability.
- Wide operating temperature range.
- Waterproof.
- High load resistance.
- High adhesion.
- Good shear resistance.
Notes on Use:
- Follow normal handling procedures for lubricants.
- Avoid excess grease or overly frequent lubrication intervals.
- Keep the packaging tightly closed to prevent contamination.
- Do not mix with other types of greases.
AAdministratorsQTV
Welcome. Feel free to leave a comment, we will respond soon