G.A. PLEX High Performance Grease
4 5 (1 evaluate)Category: Brugarolas
Manufacturer: Brugarolas
Origin: Spain
G.A. PLEX grease is a lithium-complex grease containing EP additives, suitable for medium-speed ball bearings and plain bearings. The product is water-resistant, heat-resistant, and has a high load capacity.
Technical data sheet of G.A. PLEX
Below is the technical specification table of GA PLEX-1 and GA PLEX-2 products.
|
Characteristic |
PLEX-1 |
PLEX-2 |
|
Color |
Brown |
Brown |
|
Thickene |
Lithium Complex |
Lithium Complex |
|
Base oil properties |
Mineral oil |
Mineral oil |
|
NLGI consistency class |
Grade 1 |
Grade 2 |
|
Penetration at 25ºC 60 W, (0.1mm) |
310 – 340 |
265 – 295 |
|
Penetration at 25ºC 105 W, (0.1mm) |
Max +50 |
Max +50 |
|
Melting point, (ºC) |
Minimum 240 |
Minimum 245 |
|
EMCOR Corrosion Test |
Maximum 1 |
Maximum 1 |
|
24h copper corrosion / 100ºC |
Maximum 1b |
Maximum 1b |
|
4 ball machine: |
||
|
- Welding load, (kg) |
Minimum 450 |
Minimum 450 |
|
- Scratch diameter 1h/40kg, (mm) |
Maximum 0.55 |
Maximum 0.55 |
|
Flow pressure at -20ºC, (mbar) |
Maximum 1500 |
Maximum 1600 |
|
Oxidation stability 100h/100ºC, (kg/cm2) |
Maximum 0.3 |
Maximum 0.3 |
|
Evaporation loss, (%) |
||
|
- 22h/100ºC |
Maximum 0.5 |
Maximum 0.5 |
|
- 22h/150ºC |
Maximum 2.5 |
Maximum 2.5 |
|
Water resistant 90ºC |
Grade 1 |
Grade 1 |
|
Operating temperature, (ºC) |
-20 to 150 |
-20 to 150 |
MSDS information of G.A. PLEX
| MSDS information |
Typical Value |
| Chemical name | G.A. PLEX |
| Health hazard |
Chemical Hazards: The grease can cause skin and eye burns. Health Hazards: The grease can cause skin, eye, and respiratory irritation |
| First aid measures |
If fat is swallowed, seek medical attention immediately. If fat is inhaled, move to an area with fresh air and breathe deeply. If fat comes contact with skin, wash thoroughly with soap and water. If fat enters the eyes, rinse with clean water for at least 15 minutes and seek medical attention immediately |
| Precautions | Wear gloves, goggles, and a mask when using the product |
| Preserve | If grease is spilled the environment, collect it and dispose of it in accordance with regulations |
| Treatment and disposal |
If fat is discarded, it must be disposed of in accordance with the law. |
Outstanding features of G.A. PLEX
- High melting point.
- Good load-bearing capacity.
- Outstanding abrasion resistance.
- Insoluble in water.
- Good mechanical resistance.
- Good protection against corrosion.
- Good antioxidant capacity.
- Long lifespan.
Applications of G.A. PLEX
G.A. PLEX grease can be used as a long-term lubricant in rolling bearings, water pumps, electric motors, couplings, cardan joints, and generally anywhere high-performance grease with stringent requirements is needed.
Safety Note:
- Normal precautions should be observed when using and handling lubricants.
- Avoid excessive grease and too frequent lubrication cycles.
- Keep the container lid tightly closed to avoid contamination.
- Do not mix with other greases of different properties.
AAdministratorsQTV
Welcome. Feel free to leave a comment, we will respond soon