G. BESLUX GRAFOL PASTE

Technical data sheet of G. BESLUX GRAFOL PASTE

Physical

Typical Value

Color

Metallic Gray

Thickener

Inorganic

Base oil

Mineral

Solid lubricants

Aluminum dust

NLGI

Grade 2 to 3

Penetration at 25ºC, 0,1mm

250 – 270

Penetration at 60W, 0,1mm

250 – 270

Pour point, ºC

Min 300

Density at 25ºC, g/cm3

1,15 - 1,20

Water resistance, 3h/90ºC

Max 1

Application temperature, ºC

-15 to 1180

MSDS Information of G. BESLUX GRAFOL PASTE

MSDS Information

Typical Value

Chemical name

G. BESLUX GRAFOL PASTE

Main ingredients

Graphite, mineral oil

Health hazard

Chemical Hazards: The grease can cause skin and eye burns.

Health Hazards: The grease can cause skin, eye, and respiratory irritation

First aid measures

If fat is swallowed, seek medical attention immediately.

If fat is inhaled, move to an area with fresh air and breathe deeply.

If fat comes contact with skin, wash thoroughly with soap and water.

If fat enters the eyes, rinse with clean water for at least 15 minutes and seek medical attention immediately

Precautions

Wear gloves, goggles, and a mask when using the product

Preserve

If grease is spilled the environment, collect it and dispose of it in accordance with regulations

Treatment and disposal

If fat is discarded, it must be disposed of in accordance with the law.

Outstanding features of G. BESLUX GRAFOL PASTE

A special product for very high temperatures where corrosion, sticking, scuffing, and other issues with screw connections are present.

It protects against scuffing, corrosion, sticking, and more.

Facilitates easy installation and removal of components.

Offers excellent electrical conductivity.

Applications of G. BESLUX GRAFOL PASTE

Please note that product-specific information, such as that for G. BESLUX GRAFOL PASTE, may be subject to changes and updates the manufacturer. Here are some common applications of the product in practice:

Anti-scale and anti-corrosion for all types of bolts, nuts, threaded joints, and headless screws: The product creates a protective film between metal surfaces, helping to prevent friction and corrosion. This ensures the smooth operation of joints and prevents jamming. The film also helps protect against dirt and rust, safeguarding the joints damage.

Suitable as a release agent for aluminum die castings: The paste creates a smooth film that prevents aluminum die castings adhering to metal surfaces. This reduces damage to the castings and improves their overall quality.

Specially used for support rollers in cement kilns: Withstanding temperatures up to 1180°C, the product is ideal for use on support rollers in cement kilns. The protective film helps prevent corrosion and jamming of the rollers, ensuring the smooth operation of machinery and equipment in the kiln.

Note that the selection of specific applications must comply with the manufacturer's instructions and requirements to ensure the best performance and safety when using this product.

How to use G. BESLUX GRAFOL PASTE

Preparation: Ensure the work surface is clean and dry. Remove any grease, dirt, or foreign matter before applying the product.

Application: Use a brush, finger, or similar tool to apply a small amount of G. BESLUX GRAFOL PASTE to the work surface. Ensure the product is evenly distributed over areas requiring lubrication, especially at points subjected to load and pressure.

Warning: Observe normal safety precautions when using and handling lubricants. Keep the product closed to avoid contamination.

Temperature and Environment: G. BESLUX GRAFOL PASTE can be used in a wide range of temperatures and high-load environments.

Please refer to the manufacturer's detailed instructions to ensure maximum efficiency and safety when using this product.