G. BESLUX PRESS MILL SX

Technical data sheet of G. BESLUX PRESS MILL SX

Physical	Typical Value
Color	Dark
Thickener	Bentonite
Base oil	Synthetic
NLGI Grade	1/2
Penetration at 60 W (0,1mm)	305
Penetration at 105W (0,1mm)	320
Freezing point (°C)	-270
Flow pressure -50°C (mbar)	1100
EMCOR Corrosion Test	0
Oxidation stability 100h/100°C, (bar)	-0,1
Evaporation loss 22h/100°C, (%)	0,6
Oil separation 7d / 40°C, (%)	1
Water resistance 90°C	0

Physical

Typical Value

Color

Dark

Thickener

Bentonite

Base oil

Synthetic

NLGI Grade

1/2

Penetration at 60 W (0,1mm)

305

Penetration at 105W (0,1mm)

320

Freezing point (°C)

-270

Flow pressure -50°C (mbar)

1100

EMCOR Corrosion Test

Oxidation stability 100h/100°C, (bar)

-0,1

Evaporation loss 22h/100°C, (%)

0,6

Oil separation 7d / 40°C, (%)

Water resistance 90°C

MSDS information of G. BESLUX PRESS MILL SX

MSDS information

Typical Value

Chemical name

G. BESLUX PRESS MILL SX

Health hazard

Chemical Hazards: The grease can cause skin and eye burns.

Health Hazards: The grease can cause skin, eye, and respiratory irritation

First aid measures

If fat is swallowed, seek medical attention immediately.

If fat is inhaled, move to an area with fresh air and breathe deeply.

If fat comes contact with skin, wash thoroughly with soap and water.

If fat enters the eyes, rinse with clean water for at least 15 minutes and seek medical attention immediately

Precautions

Wear gloves, goggles, and a mask when using the product

Preserve

If grease is spilled the environment, collect it and dispose of it in accordance with regulations

Treatment and disposal

If fat is discarded, it must be disposed of in accordance with the law.

Outstanding features of G. BESLUX PRESS MILL SX

Non-toxic and NSF H1 compliant.

Operating temperature range: -50°C to +180°C.

Excellent anti-corrosion, anti-oxidation, anti-flow, and high-pressure properties.

Good sealing capabilities.

Resistant to moisture and washout by water, solvents, acids, and other substances.

Compatible with seals, rubbers, and elastomers.

Exceptional oxidation stability, extending lubrication intervals.

Applications of G. BESLUX PRESS MILL SX

Brugarolas G. Beslux Press Mill SX can be used in a variety of applications, including:

Food and Pharmaceutical Industry: This grease can be used to lubricate surfaces such as cutting and butcher tables, conveyor belts, meat bins, and food storage surfaces, helping to protect these parts corrosion, wear, and contamination.

Manufacturing Industry: It is also suitable for use in the manufacturing sector, including factories producing automobiles, machinery, electronic equipment, and more. It lubricates parts such as bearings, shaft rings, and moving components, reducing friction and noise while prolonging the lifespan of these parts.

Construction Industry: In the construction sector, this grease can be applied to construction machinery, lifting equipment, and other moving parts, reducing wear and helping machines operate smoothly.

In addition, the product is outstanding for its anti-corrosion, water-resistant properties, and wide operating temperature range of -50°C to +180°C.

In summary, G. BESLUX PRESS MILL SX is a high-quality grease that can be used across a variety of applications.

G. BESLUX PRESS MILL SX User Manual

The G. BESLUX PRESS MILL SX User Manual includes the following steps:

Surface Preparation: Ensure the surface is clean and free of oil, dust, or moisture. Dry the surface if necessary.

Grease Application: Use an appropriate tool to apply grease to the points requiring lubrication. For rotating bearings, apply grease to the contact areas.

Periodic Inspection: Check and reapply grease periodically or as needed, depending on working conditions and equipment requirements.

Safety and Storage: Follow safety measures when using the grease. Store it in a dry place, away direct sunlight and high temperatures.

Follow Manufacturer Instructions: Read and follow the manufacturer's instructions for use to ensure optimum performance and safety.

Note: Some specific applications may require detailed instructions the manufacturer or a qualified technical expert. Always refer to the specific product documentation to ensure proper use.