G. BESLUX PLEX H-2

G. BESLUX PLEX H-2 grease is a premium lubricating grease with good adhesion, designed for heavy-duty mechanisms operating in the temperature range -15ºC to 150ºC. The product is suitable for a wide range of applications, including the steel, mining, and OP industries.

Technical data sheet of G. BESLUX PLEX H-2 

MSDS Information of G. BESLUX PLEX H-2

Outstanding features of G. BESLUX PLEX H-2

• Excellent load-bearing capacity and effective anti-wear properties, prolonging the service life of lubricated parts.
• High oxidation resistance, maintaining lubrication efficiency for a long time.
• Good water and dirt resistance, protecting lubricated parts in harsh environments.
• High dropping point, reducing the need for periodic lubrication.
• Does not contain solvents, acids, or heavy metals, making it safe for users and the environment.

Applications of G. BESLUX PLEX H-2

G. BESLUX PLEX H-2 is a special lubricating grease, widely used in heavy industries where machinery and equipment operate under harsh conditions, such as heavy loads, high temperatures, and exposure to water or dirt.

Here are some specific applications of G. BESLUX PLEX H-2 in practice:

• In the mining industry: Lubricates important parts such as bearings, joints, and bushings in mining machinery like excavators, diggers, bulldozers, crushers, etc. This grease helps reduce friction, prevent wear, protect parts damage, and prolong their service life.

• In the manufacturing industry: Lubricates important parts in manufacturing machinery, including food processing machinery, construction material manufacturing machinery, chemical manufacturing machinery, etc.

• In the transportation industry: Lubricates parts in trucks, dump trucks, cars, etc. This grease helps reduce friction, prevent wear, protect parts damage, prolong their service life, and contribute to fuel savings.

• In the energy industry: Lubricates bearings, joints, and bushings in generators, turbines, etc., protecting parts damage, prolonging their life, and ensuring stable and safe operation.

• In the metallurgical industry: Used in metallurgical machinery, such as furnaces and steel rolling machines. The grease helps lubricate, reduce friction, prevent wear, protect parts damage, and extend their life.

Thus, G. BESLUX PLEX H-2 is a product with many outstanding features and high applicability, making it the perfect solution to replace SKF LGEV 2 heat- and pressure-resistant grease.

How to use G. BESLUX PLEX H-2

Preparation

• Prepare the necessary tools: grease gun, funnel, rag, etc.
• Clean the surface to be greased.
• Check the temperature of the surface to be greased. The surface temperature must match the working temperature of the grease.

How to Apply Grease

• Use a grease gun to pump grease the parts to be lubricated.
• Pump grease evenly over the surface of the parts to be lubricated.
• Use a funnel to pour grease hard-to-reach areas.
• Wipe off excess grease the surface of the parts.

Note

• Do not use grease when the surface temperature is below -20°C.
• Do not use grease when the surface temperature is above 150°C.
• Do not use grease in areas where there is a risk of explosion.

Please refer to the manufacturer's detailed instructions to ensure maximum efficiency and safety when using this product.