G. BESLUX PLEX BAR (H, L and M series)

G. BESLUX PLEX BAR (H, L, and M series) is a line of barium complex greases manufactured by Brugarolas, Spain. The product is known for its resistance to water, chemicals, high load capacity, and stability at high temperatures. It is specially designed for needle bearings and mechanisms operating at very high speeds, with a speed factor (Sf) of 10^6.

Technical Specifications Table for Products in the G. BESLUX PLEX BAR Series

Note:

• NLGI is a measure of the viscosity of the lubricant.
• Penetration is measured by the number of millimeters a fixed probe penetrates in 1/10 mm.
• The dropping point is the maximum temperature at which the lubricant remains liquid.
• Operating temperature is the temperature range within which the lubricant can operate effectively.
• Refer to the special notes for each product.

Applications of G. BESLUX PLEX BAR Series

G. BESLUX PLEX BAR products (H, L, and M series) are lubricants designed to meet the requirements of many different industrial applications. Here are some practical applications of this product line:

G. BESLUX PLEX BAR H-2
Applications: Industrial applications requiring adhesive lubrication properties. Crushers, tractors, and applications with adhesive environments.

G. BESLUX PLEX BAR L-2
Applications: Applications requiring high-speed lubricants. Water pumps, water dispensers, and equipment operating at high speeds.

G. BESLUX PLEX BAR M-2
Applications: Used in applications requiring heavy-duty lubricants. Crushers, metal cutters, and load-bearing equipment.

G. BESLUX PLEX BAR L-2/S
Applications: Applications in low-temperature working environments. In cold conditions, such as in the refrigeration industry.

G. BESLUX WHITE M-2
Applications: Used when a white lubricant is required. In applications in the food and pharmaceutical industries, and applications where color is important.

G. BESLUX PLEX BAR M-2/1
Applications: Applications requiring good anti-wear and load-bearing properties. In agricultural machinery, planting machines, and other applications requiring durability.

Note that each product line has its own characteristics, and the choice depends on the specific requirements of the application and the working environment. For detailed information and instructions for use, please refer to the specific technical documentation the manufacturer.

How to use G. BESLUX PLEX BAR Series

 Please note that the following information is for reference only:

1. Check Application Requirements: Determine the specific requirements of the lubrication application, including load, speed, operating temperature, and working environment.

2. the Appropriate Lubricant Type: Based on the application requirements, the appropriate G. BESLUX PLEX BAR lubricant type such as H-2, L-2, M-2, or L-2/S, depending on the specific properties required.

3. Contact a Technical Expert: If you have any questions or need detailed advice, contact the manufacturer's technical expert for specific support and advice.

4. Check Drop Point and Working Temperature: Ensure that the drop point and working temperature of the selected product are suitable for the actual working conditions.

5. Cleaning and Surface Preparation: Before applying lubricant, ensure the surface is clean and free of any remaining dirt or old oil.

6. Applying Lubricant: Apply the lubricant evenly to the surface to be lubricated, using the appropriate amount of lubricant as required.

7. Periodic Inspection: Perform periodic inspections to ensure that the lubricant is maintaining its performance and perform maintenance as necessary.

8. Follow Instructions for Use: Always follow the manufacturer’s instructions for use and restrictions.

Note that for each specific application, it may be necessary to consult a technical expert to ensure the most effective selection and use of lubricant.